Ready for use restraint kit :
Full body harness JANUS99 made of 45-mm wide red polyester straps
- with back and chest attachments,
- two corrosion-resistant parachute buckles at the thigh level
Rope lanyard ELARA99 12mm in ø. Length: 1,5 m with 2 thimbled loops. Fitted with a wear indicator (2 blue wear threads) and a ribbon to ensure traceability. Loops protect rope against wear caused by connector passage
2 karabiners ELARA01: Screw safety karabiner provided with a double locking mechanism. 17-mm opening. Screw manual locking type. Anticorrosion coating and antilocking of the locking ring.
Duffel bag with zipper pocket and drawstring. Size: 46 x 34 cm.
EN354, EN361, EN362

Fall arrester protective kit, delivered in a storing bag 45cm x 23cm x 25cm, including HA054 harness, AM002 karabiner, AN202 SECUREX strap.
EN361, EN355, EN362

EN202 Scaffolders Harness Kit
Comprising of the following components:
RA005 Carry shoulder bag
AM005 Self locking Scaffold hook
AN202 Securex Lanyard
HA008 Full body harness
EN361

DESCRIPTION:
Full body harness with 2 attachments pts HA544:indissociable with a full body harness HA044 and a high visibility yellow jacket.
- Full body harness with bicoloured polyester straps (45 mm): front and back attachment, ventral belt, karabiner, quick buckles at thigh level.
- Polycotton jacket treatment Teflon and waterproof closed by a zip including : 2 low pockets with flap, one for the mobile, 2 lateral pockets and a fillet stitch lining.
EN471 EN361

Full body harness designed to be fitted with a fall arrest system. The harness is made of 45-mm straps and consits of:
- back and front attachment points
- non corrosion quick buckles at thigh level
- a sit strap
- non corrosion adjusting buckles on shoulders
- a karabiner
EN361

Full body harness with back attachment, made of 45 mm wide red polyester straps and two corrosion- resistant parachute buckles at the thigh level, to open and easily adjust the harness.
EN361

Self-retractable fall arrester equipment with cable, provided with an inertial braking mechanism, a built-in energy reducer and protective casing. Wrench webbing 46mm wide. Strap length: 2.5 m.
EN360

Retractable type fall arresters consisting of 2 shells in heavy-duty ABS, which improves shock and corrosion resistance. 4 mm diameter galvanized cable, in 10 metres lengths, with double lock carabiner.

MATERIALS:
Shells : heavy-duty ABS
EN360 EN362

Rope lanyard, 12mm in ø. Length: 2m with 2 thimbled loops. Fitted with a wear indicator (2 blue wear threads) and a ribbon to ensure traceability. Loops protect rope against wear caused by connector passage.
EN354

Lanyard made of polyamide tubular strap, width: 25mm with a 50-mm buckle sewn on both ends with 4 strengthening seams, length: 2m.
EN354 EN795

Work positioning adjustable lanyard, maximum length: 2m, polyamide ropes: 14mm in ø with a reducer on one end and a thimbled loop at the other end.
EN358

Energy absorber fall arrester fitted with a textile wrench webbing 26mm wide, one screw karabiner (AM002 and one snaphook (AM005).
EN355

Energy absorber fall arrester fitted with a textile wrench webbing 26mm wide, two screw karabiners (AM002). Length folded: 2m. Unfolded: 3,20m.

Safety hook provided with a double locking mechanism. 62-mm opening. Self-locking type.
EN362

Screw safety karabiner provided with a double locking mechanism. 17-mm opening. Screw manual locking type. Anticorrosion coating and antilocking of the locking ring.
Zinc coated steel.
EN362